Image 1: Transmitter unit and the Heat detector
Image 2: Internal circuit board
To Pair a new Heat Sensor
1. Start with the transmitter unit and the Heat detector disconnected. See Image 1
2. Push switch one to the on position. LEDs will flash on the unit after a few seconds.
3. Use the Assure App to set the hub to pair to a Heat Detector
4. When you see the below screen, push switch 3 on the transmitter
5. Wait for hub to successfully pair and message appear
6. Heat Detector can be connected using the wire to the Transmitter or the Transmitter can be mounted to the ceiling and then Heat Detector connected.
7. If the hub is still displaying the option to test, then the Heat Detector can be activated to trigger the testing without calling or signalling to the ARC. *Once past this stage then any tests will be live.